Latest Rockchip Batch Tool ( Rockchip v1.8.0 ) is released and available to download without waiting. so, If you already using its old version on your laptop and PC/computer, Then you are required to new update Rockchip setup file. You can update it from the provided latest version ( v1.8 ), then initially download Rockchip v1.8.0. In that case, if you have any question and problem in the new update process here.
Multiple Link for Rockchip Batch Tool v1.8.0 Download
Rockchip v1.8Download and Share File:
. Others Tools: If you are searching for the Others Chipset Devices flash tool, Then downlod MTK devices Imei tool SN Write Tool pages. If you use RockChip for PC to Flashing your Android mobile, then your personal data including Contacts, Applications and etc Loss Process. Rockchip Batch Tool v1.7 is a small application for windows computer created by KS Rockchip Mobile Inc, which allows you to flash the stock fimwware on rockchip based device. Rockchip Batch Tool v1.7 is a very useful tool if you want to upgrade the software or completely replace it with a newer version. If you own a device that uses Rockchip.
If you also want to install Rockchip software setup on your PC. It also allows users to free download and share files. So, Now click Rockchip Batch Tool download tab and open a new page, finally click download tab to start Rockchip v1.8.0 file download, as was previously stated.Rockchip Batch Specification and Features
Support OS:1. Windows XP (Rock-chip support also 32-bit & 64-bit)
2. Windows 7 (Rock-chip support also 32-bit & 64-bit).
3. Windows 8 (Rock-chip support also 32-bit & 64-bit).
4. Windows 8.1 (Rock-chip support also 32-bit & 64-bit).
5. Windows 10 (Rock-chip support also 32-bit & 64-bit).
How To Use Rockchip Flash Tool
Released Version:
a. Such as Rock-chipTool v1.8.00
b. Such as Rock-chipTool v1.7.00
c. Such as Rock-chipTool v1.6.00
d. Such as Rock-chipTool v1.5.00
e. Such as Rock-chipTool v1.4.00
Firmware Upgrade:
Rockchip-set tool that helps you IMG firmware upgrade an android tab/mobile, You will Flash any devices with your computer/PC. So Rockchip Tool can detect multiple tab/mobile automatically and upgrade firmware file for Android tab/mobile. if you don’t have one (1), it differs from each Rockchip-set tab/mobile.
Click here to Download: Download SPD Upgrade Tool V2.10.1003 page.
!! Important !!
1. Device charge 40%-60% minimum.
2. Read and then do it.
3. Make a backup of your tab / mobile.
4. Using Rock-chip tools - Make a any mistake bricked your tab / mobile.
With this in mind:
Users are also advised to frequently visit the Rockchip Batch Tool official website or Fuzhou Rockchip Inc developer site to view and download tool the new Rockchip v1.8.0 / RockchipBatch-tool file. It is also requested for the users to keep them updated with the latest changes in the Rockchip tool.
You might also be interested page in:
15 Seconds ADB Installer v1.4.315 Seconds ADB Installer v1.4.3 is one of the best smartphone tool.
ioRoot Application v25.00ioRoot Application v25.00 is one of the best android Application.
Sp Flash Tool
Related Posts
This is a common guide for reflashing RockChip based devices. All RK SoC (RK3066, RK3188, RK3288, RK3229, RK3328, RK3399 and so on) supports the same applications and drivers for Host system, if 3rd party producers do not add any other limitations or special options. Differences can be in hardware parts, so you need to detect OTG port and recovery buttons correctly.
Notice: this guide is 100% working with Ugoos RK devices.
BEFORE START
What do you need:
- Image file
- Host PC
- USB OTG Cable
- Supported host OS: Windows XP (32/64bit) Windows 7 (32/64bit) Windows 8 (32/64bit) Windows 10 (32/64bit)
The first thing you need is to download the archive with firmware. Inside archive, you find:
- BatchTool or Android Tool - tool for reflashing (separate Android Tool and drivers you can download HERE)
- DriverAssitant - tool to install drivers and firmware image file
- Firmware image
INSTALLING DRIVERS
Launch RK DriverAssitant and press “Install Driver”
Apply all changes and warnings during installation until finishing message
CONNECTING TO PC
Run Batch tool or Android tool on your host PC.
In order to connect device with Host PC and run bootloader mode you should perform following steps:
1. Plug off device power adaptor.
2. Connect device to computer via usb OTG port, much better to use certified OTG USB cable from package.
3. Run Batch tool or RK Android tool
4. Hold the hardware recovery button.
5. Plug in power adaptor and Turn on device if not turning on automatically.
Tip: if you can’t hold recovery button or it’s broken you can reboot to bootloader from Ugoos power menu.
RECOVERY BUTTONS AND OTG USB PORTS LOCATION ON UGOOS DEVICES YOU CAN SEE IN THE END OF THIS INSTRACTION.
IF YOU USE ANDROID TOOL:
In Android Tool choose “Upgrade Firmware” tab. If you did everything correctly and the RK driver installed properly on your computer, ANDROID TOOL shows you message “Found One Loader Device “
Click “Firmware” button and specify the path to the firmware file. You need to wait until the program download information about the firmware, then it will display report on the screen. Now click “Upgrade” button to start reflashing device. At the end, you will see a report indicating a successful operation.
For flashing dualboot or clear linux firmware (for example dualboot UT3/UT3s/UM3 firmwares)
Run Android Tool. If you did everything correctly and the RK driver installed properly on your computer, ANDROID TOOL shows you message “Found One Loader Device “ In Android Tool choose “Download Image” inset. Default program configured to flash 'clear' android on your device. If you want install “Dualboot” or “Clear Linux” click right mouse button by program window, and then select “Load config”.
3. Then choose one of configurations files:
config.cfg - if want flash only Android
config_dualboot.cfg - if want flash dualboot
config_linux.cfg - if want flash only linux
3. Now click the “Run” button to start reflashing device. At the end, you will see a report indicating a successful operation.
IF YOU USE BATCH TOOL:
Main difference between Android tool and Batch tool is Batch tool can reflash several devices at the same time (6 max).
Run the Rockchip Batch Tool and click on the “…” to choose file with firmware. If you did everything correctly and the driver is installed on your computer, you will see green light on one of the indicators.
Now click the “Upgrade” button to the firmware of the device. At the end, you will see a report indicating a successful operation.
OTG usb ports and recovery buttons on Ugoos devices:
Ugoos UT4/UT3+/UT6
Recovery button and USB OTG port is on the right side
Ugoos UT3/UT3s (old version)
Recovery button and USB OTG port is on the right side
Ugoos UM3/UM4
Recovery button is from the left to antenna connector
OTG USB port is left one.
Ugoos UT5 Pro
Ugoos UM2
Ugoos UT2
Rockchip Batch Tool
Ugoos UT1
Rockchip Flash Tool 1.8
Find us: